- Model NO.: FD series
- Pullution Sources: Air Pollution Control
- Brand Name: Doublestar
- Product Certification 1: ISO9001:2000
- Application: Collect Dust by Cleaning Air
- Application Area: Industry
- Origin: Shandong in China
- Processing Methods: Physics
- Place of Origin: Shandong, China (Mainland)
- Model Number: Fd Series
- Product Certification 2: SGS BV
- Control: Electric-Pneumatic
- Trademark: DOUBLESTAR
Machine safe ruuning condition. Cleaning pluse is controlled by electric or pneumatic. Cleaning time and interval can be adjusted. Dust collector / Dust Collection for shot blasting machine. Dust Collector / Dust Collection for melt industry or other industry.
DOUBLESTAR has developed a lineup of cartridge filter systems that is setting new standards and making a significant contribution to process safety.
Filtration with process safety
Dust is extracted and flows through the impact separator, where the initial separation of heavy dust particles occurs. After this, dust enters the lower filter chamber and is removed as air flows through the filter cartridges. The clean air then flows upward into the clean gas chamber.
The filter cartridges are cleaned in programmable intervals using pulses of compressed air.
The dust particles are fed to a hopper located beneath the filter, where they are collected in a dust collection container made of metal or paper.Clean air is released to the outside environment through openings in the side of the upper filter housing. In the event that a filter cartridge is destroyed, additional filter inserts collect the dust to the greatest possible extent.
Newly developed slide-in inserts simplify the exchangeand replacement of cartridges. The cartridges are pulled from the filter unit and can then be replaced outside the filter in a clean environment. The cartridges are still precisely positioned when reinserted and always install with the proper contact pressure.
Advantages of the DOUBLESTAR filter units
A quick release system makes it possible to exchange cartridges in a very short period of time.The system ensures that cartridges are always installed with the correct contact pressure in an absolutely centralized position.
The conical shape of the filter cartridges ensures the optimized routing of air. The intensity of the compressed air blast can be lowered and the filter material is protected.
During cleaning, dust dislodges more easily because of the filter cartridge's wide-angle fold.
Environmentally friendly disposal through material separation and a low amount of waste.
Depending on the application, cartridge filters are available in paper or polyester fabric.
The filter unit can be equipped with a variety of dust collection containers: paper sacks, metal containers, big bags or dustbins.
An impact separator installed in the filter housing is used to pre-separate dust. It prevents coarse dust particles from damaging the filter cartridges.
By using an integrated secondary filter, residual dust levels ≤ 1 mg are achieved. This makes it possible to re-circulate exhaust air into the workshop hall.
Maintenance-friendly construction with large maintenance openings.Inexpensive spare parts.
Filtering area m 2
Wind capacity treatment m 3 /h